Fullfit
Straight abutment
Full ft abutment system it is a new prosthetic system which is designed with the cooperation of Shrider GMBH in Germany.
Thin
|
This thin abutment comes in the following
situation:
when the space is limited, for example between
2 teeth or implants usually in the anterior of the
mouth. |
Cementing post (Thin) AGM-104 |
Standard abutment
|
A straight titanium abutment with hex.
for implants with diameters of 3.75 and 4.2 mm.
includes the connection screw. |
Cementing post (Standard) AGM-101 |
High base
|
This raised standard abutment has a basis of 3
mm above the bone. This is appropriate for thick
gums or when the implant is very deep. |
High base Cementing post AGM-108 |
Long Neck
|
A straight titanium abutment with hex.
with a 4mm higher neck.
for implants with diameters of 3.75 and 4.2 mm.
includes the connection screw. |
Long Cementing post AGM-109 |
Cementing post with Shoulder
Available in diferent heights in order to locate base of crown.
Plastic sleeve may be used for carving and casting with or without an internal hex.
Abutment available in 4 heights: 1, 2, 3 and 4 mm.
Cementing post with
Shoulder 1 mm base |
AGM - 602-1 |
Cementing post with
Shoulder 2 mm base |
AGM - 602-2 |
Cementing post with
Shoulder 3 mm base |
AGM - 602-3 |
Cementing post with
Shoulder 4 mm base |
AGM - 602-4 |
Angulated Abutments
|
15°Angulated Abutment |
AGM - 102 |
|
15°Angulated Abutment long |
AGM - 107 |
|
25°Angulated Abutment |
AGM- 103 |
Ball Attachment
Ball attachment structure connected by a click to the removable denture.
The abutment is available in diferent heights – 0.5, 1, 2, 3, 4, 5, 6 & 7 mm –
selected according to height of gums.
The Ball attachment abutment is designed with a stainless steel housing and a
silicon intermedian housing.
|
Ball attachment 0.5 mm |
AGM-105-0.5 |
|
Ball attachment 1 mm |
AGM-105-1 |
|
Ball attachment 2 mm |
AGM-105-2 |
|
Ball attachment 3 mm |
AGM-105-3 |
|
Ball attachment 4 mm |
AGM-105-4 |
|
Ball attachment 5 mm |
AGM-105-5 |
|
Ball attachment 6 mm |
AGM-105-6 |
|
Ball attachment 7 mm |
AGM-105-7 |
Titanium Healing Cap
The healing cap is set on the implant after it has been exposed, and remains in the
jaw until soft tissue (the gums) has healed.
Its function is to prepare the site for placing the prosthetic device. It can also be
used as a temporary prosthetic structure.
healing caps are available in 2 sizes: normal, and wide. Heights: 2, 3, 4, 5, 6 and
7mm. Selected height is a function of the thickness of the gums.
Healing cap 2 mm
Healing cap 2 mm Wide |
AGM-203-2
AGM-203-2w |
Healing cap 3 mm Wide
Healing cap 3 mm |
AGM-203-3
AGM-203-3w |
Healing cap 4 mm Wide
Healing cap 4 mm |
AGM-203-4
AGM-203-4w |
Healing cap 5 mm
Healing cap 5 mm Wide |
AGM-203-5
AGM-203-5w |
Healing cap 6 mm
Healing cap 6 mm Wide |
AGM-203-6
AGM-203-6w |
Healing cap 7 mm
Healing cap 7 mm Wide |
AGM-203-7
AGM-203-7w |
Anatomic Abutments
Suitable for single implant restoration, or a screw-retained bridge, and also to raise
the height for performing various procedures: overdentures, removable dentures,
bridges, bars.
Advantage: close the screw at the base of the abutment to the implant only once
without opening to proceed to restoration (thread bridge only). Comes in 3 heights:
2,3 and 4 mm.
|
Anatomic Abutments 2 mm |
AGM-207-2 |
|
Anatomic Abutments 3 mm |
AGM-207-3 |
|
Anatomic Abutments 4 mm |
AGM-207-4 |
|
Anatomic Plastic & connection screw |
AGM-207-5 |
Plastic Abutments
The plastic sleeve is made from Delrin, a material appropriate for casting as it
melts when heated without leaving any residue.
Plastic structure for casting with no internal threading. Available with or without
a hex, in a narrow platform. The sleeve with the hexagon is meant to build a
structure on an implant or to set a crown or bridge that fts on to the abutment.
The sleeve without the hexagon is designated for various tasks (root balls, various
attachments). The plastic sleeve is efective when a number of prosthetic devices
must be ftted in. It is easy to work with because it is made of plastic and it is easy
to cast
|
Wide Direct Hex Castable plastic |
AGM-P1 |
|
Plastic sheet for shoulder abutments |
AGM-P2 |
|
Direct Hex Castable plastic |
AGM-P3 |
Implant Analog
Made of stainless steel to allow preparation of lab models.
Available in narrow or wide platforms.
|
Non Hex Implant Analog |
AGM-204 |
|
Implant Analog with internal Hex |
AGM-214 |
|
Wide Implant Analog with internal Hex |
AGM-214W |
Click Transfer
Springy impression transfer with no afxing screw. Suitable for closed tray method
with higher precision. There is no need to remove nor to insert the transfer as it
remains in the intermedial model throughout the process. Efcient especially for
back teeth where there is no space for wrench.
Transfer With Click
Connection
(Close Tray) |
AGM-302 |
Wide Transfer With Click
Connection
(Close Tray) |
AGM-303 |
Transfer With Screw
Connection
(Open Tray) |
AGM-301 |
